|
|
Panasonic WJMX50 
Video A/V Mixer
$175.00
• 4 inputs of Composite or S-Video• 4 sources
can be switched and any 2 of them routed to the program
buses • Digital special effects: 62 steps strobe,
still, frame, mosaic, negative, paint (posterization),
mono, multi (1/4, 1/9, 1/16 screen), trail and AV synchro
• 32 wipe patterns can be operated manually, with
RS232C connection it is possible to program more wipe
patterns by combining external wipe pattern control numbers
assigned with zoom, scroll, blinds, paring • Basic
wipe patterns: multiwipe, paring, wipe edge decoration
(blinds), compression, slide, H/V aspect, wipe boundary
effects, joystick positioner, wipe direction • Chroma
key • Picture in picture • No genlock required
for sources
|
|
• 8 high resolution inputs accomodate composite (NTSC),
S-Video, Component, HDTV: 1080i / 720p / 480p and Computer
video sources inputs of 15K to high resolution 1600 x 1200
with horizontal scan rates up to 100KHz on BNCx5 connectors
• Automatic synchronization to all sources • Various
mixing & transition effects: Cut, Dissolve, Wipe, Freeze,
Picture-in-Picture, Up, Down, Left, Right, Mosaic, Curtain
Open / Close / Up / Down, all with a variety of time, size,
edge width, etc • Input signal types: Composite (NTSC
/ PAL), S-Video, Component (RGB or YUV), RGB, RGBS, RGBHV,
RGsB, Sync on green • Inputs are completely and independently
configurable for source, luminance & chrominance levels
• 350 MHz bandwidth • Outputs: 2 Main (BNCx5 &
HD-15 pin) and 1 Preview HD-15 pin • Output signal
type is RGBS or RGBHV selectable from 640x480 to 1365x1024
• Adjustable scaler for output image sizing
• Includes 2 monitors for use with Preview and Main
outputs •
Unit can be used alone or up to a group
of 2 - 5 for multi-screen presentations when controlled
with optional "Multi-Screen Controller"
CLICK
FOR BACK VIEW
CLICK
FOR PDF SPECIFICATION SHEET
Options: Multi-Screen Controller
$150.00
CLICK
FOR FULL-SIZE IMAGE
|
|
CLICK
FOR FULL-SIZE VIEW
Extron CrossPoint 88HVA
Distribution Matrix 8x8 Switcher / Router
$400.00
• Capable of switching any type of video signals:
RGBHV, RGBS, RGsB Analog (200MHz Bandwidth), Video (Composite,
S-Video, 3 wire Component) and Balanced Audio • RGB,
Sync and Video connectors are BNC • Complete Breakaway
capability • Front panel or RS-232/422 control •
I/O configuration memory presets • Audio inputs can
be independently adjusted
|
 Videotek RS10A
10X1 Routing Switcher
$50.00 • Ten video inputs,
bridging/two video outputs • Two audio inputs for
each video channel • Video/audio follow or breakaway
control • BNC video and balanced XLR audio inputs
and outputs • Vertical interval switching •
Momentary contact push buttons and "LED"
audio/video indicators
|
Extron Model 8 Plus
8x1 RGBS Analog Switcher
$50.00 • Active 8 input, 1 output
• BNC connectors • 300MHz bandwidth can be used
as NTSC switcher with audio follow •
RS232-controllable • Inputs are 75 ohm terminated
• LED input switched indicators • External
power supply
|
|
Altinex MX2226AT.jpg)
6 in x 1 out Bi-directional RGBHV Switcher
$45.00
• 6 x 1 Bi-directional allows this to be used as a
source or routing switcher • Controllable with front
panel buttons or RS-232 • "Video Off" function turns
of the video signal and allows sync to flow through so the
display will not go into "Blue Screen" mode when video is
not present • 5 BNC connectors for each line •
400MHz bandwidth • Internal power supply
|
Extron SW4AR/SW4AR MX
4x1 RGB Analog Switcher
$25.00/$35.00 • 4 input, 1 output,
Bi-Directional • BNC connectors • 250MHz
(350MHz SW4AR MX) bandwidth • Can be used as NTSC
switcher with audio follow • RS232 or contact
closure controllable • Inputs are 75 ohm terminated
• LED input switched indicators • Auto-Sync
Sensing Switching capable, SW4AR MX only • External
power supply (Internal on SW4AR MX)
|
TEL-2 Video Screen Splitter
$25.00 • Will display 2 sources on
split screen • Variable screen width • Will
wipe from one source to another • Genlock input
|
Panasonic WJ220
Active Video Switcher
$15.00 • 6x1 composite video switcher
• Clean vertical interval switching between selected
sources • Looping BNC inputs
|
|
lg.jpg)
