
|
|
Panasonic WJ300B
Video Distribution Amplifier
$15.00 Selectable 1 input to 6
outputs or 2-channel with 1 input to 3 outputs each
channel BNC connectors
|
FOR-A CC106
Equalizing Video Distribution Amplifier
$15.00 Adjustable gain
Looping input 6 outputs Adjustable
compensation for up to 900' cable run BNC
connectors
|
|
Altinex DA1226AT 1x6 RGBHV
Distribution Amplifier
$55.00
350 MHz bandwidth Six individually buffered
high resolution outputs Can also be used for video
signals Frequency: 15-200 kHz horizontal, 47-180
Hz vertical All connections are BNC Internal
110/220V switchable power supply
|
Extron ADA6-300 MX 1x6 RGBS
Distribution Amplifier
$55.00 1 in x 3 out 300MHz
bandwidth BNC connectors Input level: .5 to
1.2 volts p-p Variable RGB gain Internal
power supply
|
|
Altinex DA1322AT 1x2 RGBHV
Distribution Amplifier
$40.00
Gain & Equalization for each RGB channel to allow
driving long cable runs Sync channels can be set
to pass either analog video/sync or regenerate digital (TTL)
sync 350 MHz bandwidth Two individually buffered
high resolution outputs Can also be used for video
signals Frequency: 15-200 kHz horizontal, 47-180
Hz vertical All connections are BNC Internal
95-240V continuous power supply
|
Inline IN3020 1x6 RGBS
Distribution Amplifier
$50.00 1 in x 6 out 150MHz
bandwidth Separate gain control for each output
Up to 1.5 Vp-p volts input for video Up to
8Vp-p volts input for sync Each video output is
individually buffered and can sustain short circuit for
any length of time All connectors are BNC
|
Inline IN3011 1x4 RGBS
Distribution Amplifier
$40.00 120MHz bandwidth
Frequency range: 15kHz-100kHz Fixed gain of 1.1
BNC connectors Internal power supply
|
Extron ADA3-100 1x3 RGBS
Distribution Amplifier
$40.00 1 in x 3 out 100MHz
bandwidth BNC connectors Input level: .5 to
1.2 volts p-p External power supply
|
Inline IN3012 1x2 RGBS
Distribution Amplifier
$30.00 150MHz bandwidth
Frequency range: 15kHz-100kHz Fixed gain of 1.1
Up to 1.5 volt video input range BNC
connectors External power supply
|
AV Engineers HSC1 & HSC2
Video Hum Stop Coil
$5.00 "Video Humbucker"
Eliminates hum and other interference in video
lines caused by differences in Ground Potential
Hum rejection: 55db Bandwidth: DC to 6.5MHz
(HSC1), DC to 20MHz (HSC2) No differential phase
or gain distortion Single channel BNC
in/out 75-ohm Passive device
|
Extron GLI250
RGBS Ground Loop Isolator
$50.00 Eliminates or reduces hum
bars and sync pull (wiggles) AC or DC coupling
RGBS (H/V) input/output Rejection: 47dB
250MHz Bandwidth Frequency compatibility:
15kHz-125kHz horizontal, 30Hz-150Hz vertical RGB
gain controls Input signal: Video 0.5 to 1.0 Volts
p-p, Sync 0.5 to 5.0 volts p-p 115-volt external
power supply
|
VAC PDA-2PC
Sync Pulse DA
$20.00 Six buffered outputs
Looping input Output amplitude -3.5 to -4.5V
adjustable Greater than 40dB isolation between
outputs BNC connectors
|
Catel/Tomco SM2400
TV Modulator
$50.00 38 Channel modulator
Channels 2-13; A-W and A-1; A-2; A-3 Accepts 1Vp-p
video and separate 600-ohm balanced line level audio
Output adjustable to +60dB Modulates in the
VHF and mid-band cable frequencies Metering for
video and audio modulated levels Non-looping BNC
video, XLR audio input connectors F-type RF output
connector
|
|