• 32 switchable XLR mic/TRS line balanced mono input modules • 2 Stereo Dual input modules • Theater input modules consist of: LED input metering, mic/line switch, 68dB adjustable attenuation, 4-band EQ with Hi and Lo mid-band sweep EQ, EQ defeat, adjustable level routing to 6 auxiliary sends with pre or post fade/EQ and individual punch select to 8 Sub-Groups, Phase reverse, High Pass Filter, Pan, PFL switch, 4 Bus muting circuit and Direct output • Stereo Dual input modules consist of: 1/4" balanced input jacks, line A,B switch, input attenuation, 3-band mid sweep EQ and routing to 4 auxiliary sends • The 4 Dual Group/EQ Sub-output modules consist of: 2 individual sets of LED VU meters, 3-band mid-sweep EQ, and linear fader output controls • L,R Master Output Module consisting of: LED VU meters, 6 auxiliary output level controls, Talk Back control and 1/4" headphone jack • The 6 Auxiliary outputs are TRS balanced 1/4" jacks • The 2 Main and 8 Sub-Group outputs are XLR transformer balanced • External power supply

• 16 switchable XLR mic/ TRS line balanced mono input modules • Input modules consist of: 4-band EQ with Hi and Lo mid-band sweep EQ, adjustable level routing to 6 auxiliary sends and paired punch select to 4 Sub-Groups, Phase reverse, High Pass Filter, PFL switch and Direct output • 4 Dual Group Out/Stereo Return output modules consisting of: LED VU meter, 2 output faders, PFL switch, stereo input level control, 1/4" balanced line input jacks • L,R Master Output Module consisting of: LED VU meters, 6 auxiliary output level controls, Talk Back control and 1/4" headphone jack • The 6 Auxiliary outputs are TRS balanced 1/4" jacks • The 2 Main and 8 Sub-Group outputs are XLR transformer balanced • External power supply

Mackie 1642-VLZ
Pro 16 Channel
Mixer Console
$80.00

• 8 Mono Mic/Line channels • 2 Stereo Mic/Line channels • 2 Stereo Line channels • Mono channels have 3 band EQ with sweepable midrange • Stereo channels have 4 band EQ • Every channel has 75Hz 18Db/Oct. low cut filter (ch. 1-12 only), Insert (ch.1-12 only), Mute, Pan, Solo, signal presence and clip LED • 4 Aux sends/channel (1 &2 have pre-post select) • Tape output on RCA jacks • Dual headphone jacks • Control room output • Main output is Mic or Line +4 XLR, all other outs are 1/4" line level Bal/Unbal • Compact size 16.5" W x 16.25 F-B

Input Section Layout
Master Section Layout
Back Panel View

• M1516 has 16 switchable mic/line balanced XLR inputs • M1532 has 32 inputs • Inputs have attenuation, pan, 4-band EQ with adjustable peaking and shelving, switched phantom power, 2 monitor mixes, 2 effects mixes, monitor and effects pre/post switches, dual inputs, 4 bus assigns, phase reversal, low-cut, headphone cue monitor • Output section has 4 master programs, 2 effects masters, 4 mix matrix, assignable talk back, 1/4" headphone jack with level control, headphone source select, headphone cue monitor • Metering for all outputs • All inputs and outputs are transformer isolated • External power supply

• 8 switchable XLR mic/ TRS line balanced mono input modules • 2 Stereo Dual input modules • Input modules consist of: 4-band EQ with Hi and Lo mid-band sweep EQ, adjustable level routing to 6 auxiliary sends and paired punch select to 4 Sub-Groups, Phase reverse, High Pass Filter, PFL switch and Direct output • Stereo Dual input modules consist of: 1/4" balanced input jacks, line A,B switch, input attenuation, 3-band mid-sweep EQ and routing to 4 auxiliary sends • 4 Sub-Group output modules consist of: LED VU meter, 2 band EQ, Pan, 1/4" balanced output jacks • L,R Master Output Module consist of: LED VU meters, 6 auxiliary output level controls, Talk Back control and 1/4" headphone jack • The 2 Main and 4 Sub-Group outputs are XLR transformer balanced • The 6 Auxiliary outputs are TRS balanced 1/4" jacks • External power supply

• 12 switchable mic/line balanced XLR inputs • 2 balanced XLR line level stereo outputs • Balanced XLR line level outputs for monitor and effects mix • Transformer isolated • Inputs have attenuation, pan, 3-band EQ, monitor and effects send • VU meters and peak indicators for program left/right, monitor and effects output • Sub inputs for monitor, effects, program left/right • 1/4" headphone jack with level control

• 8 switchable mic/line level balanced XLR inputs • 2 switchable mic/line level balanced XLR program outputs • Transformer isolated • Inputs have attenuation, pan, 2-band EQ, monitor 1 and 2 sends • Monitor 1 send is post EQ and fader • Monitor 2 send is post EQ and pre-fader • Master 2 band EQ output controls • VU meters and peak indicators for program left/right, monitor 1 and 2 outputs • Low impedance 1/4" monitor output jacks • 1/4" headphone jack with level control

CLICK FOR LARGER VIEW

• High gain, 84dB channel input to program output • Transformer isolated and selectable XLR mic/TRS 1/4" line inputs with 3 band channel EQ with sweepable mid frequency
center • 1/4" insertion for each input • Phantom power • Transformer isolated +24dBm 600 ohm balanced XLR stereo program outputs with separate L/R master volume controls • Independent mono output with level control • 2 auxiliary sends per channel • 2 master auxiliary sends and 2 master auxiliary returns (1 stereo and 1 mono, both panable) • Two 10 segment LED meters (L/R Master or SEND 1/2 selectable) • 1/4"
stereo headphone jack with gain control

• 6 switchable mic/line level inputs • 2 switchable mic/line level left/right outputs • Balanced XLR connectors • Inputs have pan, 2-band EQ, and low-cut controls • Transformer isolated • Left/right mixing buses • Left/right output VU meters • 1/4" headphone jack with level control

• Exceptionally quiet design • Suitable for use with DAT and CD recording • Dynamic range greater than 100dB • Four switchable mic/line inputs and output • Balanced XLR connectors • Switchable low-cut filters on each input • Peak LED indicator on each input • Backlit professional mechanical VU meter • Switchable peak program limiter • Phantom 12 or 48V DC power • 1/4" and mini headphone jack with level control • Program/monitor input selector switch on headphone gain knob • One switchable mic/line level and one line only XLR transformer isolated balanced output • Direct mix bus for stacking multiple units • Output peak/limiter Bi-Color LED indicator • Power ON LED flashes to indicate low battery • Silent switching from battery to AC • Frequency response 20Hz to 20kHz • Operates on AC or two 9-volt batteries for 8 hours

*Batteries not included

Sound Devices MixPre
Microphone Preamp
$20.00

• Studio quality 2 channel, extremely rugged, portable stereo microphone mixer • 10Hz - kHz frequency response • 66dB of gain • Phantom power • High pass filter select 80 or 160Hz, 6dB per octave • Inputs hard switched to left, center, right • High current headphone monitoring with level control and clip indicator • Sunlight readable output 7 step meters • Dual color clip indicators • Slate microphone • 1 kHz tone oscillator • Tape out and return input on 1/8" TRS • Operates up to 6 hours on 2 AA alkaline batteries when not using phantom powering

INPUTS AND OUTPUTS

MIXPRE USE GUIDE

• 4 switchable mic/line level inputs • Balanced XLR connectors • Switchable low-cut filters on each input • Switchable peak program limiter • Phantom power • 1/4" headphone jack with level control • Switchable mic/line XLR balanced output • Fixed 600-ohm line out on binding posts • Direct mix bus for stacking multiple units • Frequency response 30Hz to 20kHz • Operates on AC or three 9-volt batteries

*Batteries not included

*Shure FP42
Stereo Portable Mixer
$35.00

• Four XLR transformer isolated mic/line inputs • Pull-pot cueing on all channels • Pan pots and Low-cut filter on all channels • Tone oscillator • Master mono-stereo switch • Dual VU meters o Switchable Limiter and Phantom power • Left and right Mix bus linking on RCA jacks • 1-1/4" and mini stereo jack with volume control • Power requirements: three 9 volt alkaline batteries ( 10 hours ) or 120/240 VAC

*Batteries not included

• One input, six outputs • All balanced XLR connectors • Fully adjustable input and outputs are individually switchable for mic or line level • Balanced TRS 1/4" in/out link jacks for additional FP16 units• Transformer isolated • AC powered

• One input, Two outputs • XLR in and out • Designed to provide headphone feeds from any type of audio input • May be operated in-line • Can be used for audio line troubleshooting • Extra power for existing headphone circuits • Dual headphone jacks for 1/4" and mini • Use to monitor a roving boom, shotgun or parabolic mic• Requires one 9-volt battery

* Batteries not included

• Boosts mic or auxiliary level devices to line level • Up to 84dB gain • XLR balanced input and aux level mini unbalanced input • Balanced XLR and binding post output • 15-step gain control • LED peak indicator • Portable • Requires one 9-volt battery

*Batteries not included