Sony DXC-D30

• Sony's latest DSP (Digital Signal Processing) based on TrueEye^TM process • Newly developed Power HAD CCD • Improved color reproduction over past generation of camera technology • Drastic smear reduction • CLEAR SCAN feature • Detail corrections by DSP • Enhanced functions for picture creation • DynaLatitude^TM feature optimizes video level distribution based on video signal histograms in order to utilize the limited dynamic range of the video signal standard • DCC Dynamic Contrast Control • High sensitivity and low signal to noise ratio of 63 dB • Horizontal resolution 850 TV lines • Factory preset and custom user files • 18x9 9-162mm Canon lens • Works with DXC-637, DXC-537 and DXC-M7 accessories • AC power supply included

Sony DXC-M7 3-Chip CCD

• High quality image reproduction • S/N ratio of 60dB • 700 TV lines (luminance) of horizontal resolution • High sensitivity of F 5.6 at 2,000 lux • High image burn resistance • No comet tails • No blooming • Variable-speed electronic shutter • Controls for: dynamic contrast, knee point, gamma, detail level, pedestal level and auto-iris override • Two white balance memories for each of the four optical filter positions • 9.5-143mm F1:1.8 Canon lens • XLR 3-pin mic input with phantom power • Multiple VTR interface selection • 2-Meter 14-pin cable • Tripod adapter • CMA8 power supply • Anton battery adapter plate • Uses optional NP-1A batteries for approximately 70 min.

DXC-M7 Options:

• 5" B/W view finder • Remote zoom/focus control • Sony DR100 intercom headset

Sony DXC-537

• 700 TV lines of horizontal luminance resolution • 62dB S/N • High sensitivity of F8.0 at 2,000 lux • Hyper-HAD technology • No registration adjustments, geometric distortion, electromagnetic interference, blooming or comet tails • Variable-speed electronic shutter • CLEAR SCAN feature allows almost any computer display operating on a frequency between 60.4Hz to 101.1Hz to be shot without horizontal streaking • 9.5-143mm F1:1.8 Canon lens • CA537 docking power adapter • Tripod adapter • Compatible with all DXCM7 accessories • Operates with power supply or optional NP1 battery

DXC-537 Option:

Sony DXC390
Compact 3CCD Camera
$150.00

• High quality color image 800 TV lines • RGB, Y/C and Composite outputs on BNC • 1/3 type C mount 6.5 - 65mm motorized 10x zoom lens • CMA-D3 power supply and RM-C950 control unit allows up to 300' of remote control for zoom/focus/iris and setup menu functions with optional CCZA cables • Dimensions with lens: 12" F-B x 3"H x 2 3/4"W

Click here for camera back panel view
Click here for CMA-D3 front panel view
Click here for CMA-D3 back panel view
Click here for RM-C950 view

Options:

Sony DXC-107

• Compact body 2"H x 2 1/4"W x 5 1/8"D • 525 lines • Single CCD pickup • 48dB S/N • 6 shutter speeds from 1/100-1/10,000 seconds for motion studies • C lens mount • One BNC cable carries video and power to and from power supply • Remote power supply has video out on BNC • External sync capability • Two lenses supplied, 6mm and 12.5-75mm • Camera to mic stand adapter allows placement in small areas • Camera weight 12.7 oz

• Compact body 2.6"H x 2.6"W x 5.9"D • 470 lines • Single CCD pickup 50dB S/N • 9 shutter speeds from 1/60-1/10,000 seconds in manual mode • Auto-shutter from 1/60-1/20,000 seconds • "C" lens mount • 11.5-69mm zoom lens • Internal and external sync capability • 1.5 lux sensitivity • Back-light compensation on/off • 24VDC power supply • Camera weight 1.4 lbs

• Allows remote operation up to 300M away • Composite video output plus a selectable output for one of the following: R/G/B, Y/RY/B-Y, or Y/C signal • Scene file function memorizes four types of controls and setting values for different shooting conditions • Remote shutter speed, iris, pedestal, knee, gamma, R & B gain • Setting values can be set for on-screen display • For use with DXC-M7, DXC-537, DXC-637, DXC-D30

• 165 ft. • On reel • 26-pin

• 330 ft. • On reel • 26-pin

• Allows linking of Sony CCZA50/100 cables

• Typical run time: 2 hours at 25W, 3 hours at 18W, 4 hours at 13W • 4 3/4 lbs

Anton/Bauer 30/13

• Selectable voltage • 30V at 4AH • 13.5V at 8AH • Built-in overnight charger • Comfort design • Will work with LSFC fast charger (see next item)

• Single position, one-hour charger • Accepts all Anton/Bauer 4AH Snap-On, Pro Pac 90 and Pro Pac 60 NiCad batteries, and all Anton/Bauer battery belts • Size: 7"x 6 1/4" x 4" • 115/230V, 50/60Hz

• 4-slot battery quick charger • 4NP1A 1.7AH batteries • Additional NP1A battery available separately

• Atari CPU using the Telescroll software • Color • Variable speed • 5 1/2 inch floppy drive • Local monitor included • BNC composite video output

Option:

• Compact and bright image • Script appears on reflective angled glass • Color monitor • BNC composite input

• Compact design • Lightweight • Switchable auxiliary video input • Adjustable script feed speed with talent remote • Switch between normal and reverse video displays • Adjustable video enhancer makes reading easier • This unit is designed for small applications such as EFP • Light, rugged and easy to work with